EFFICENT: The MODÌ System is easy and fast to assemble, allowing for considerable reduction in construction time. An unskilled worker can lay over 850 square feet per hour.

SAVINGS: Save time and money by forming only the perimeter of the foundation. Using the MODÌ System, it is now possible to make a monolithic placement of concrete for both the slab and the footings. When completed, one removes only the perimeter forms; there are no more interior forms to strip, clean and store.

INEXPENSIVE: By using the MODÌ System, cost saving are achieved since less concrete is required to obtain the required load bearing characteristics of the slab when compared to traditional methods.

VERSATILE: It can be laid most surfaces including compacted gravel, compacted earth and un-reinforced concrete.

VENTILATION Ventilation is achieved in all horizontal directions.

BETTER: By building with the MODÌ System, rising humidity, dampness, mould and mildew is substantially reduced thus increasing the comfort of the home or work place.

ENERGY SAVINGS: Save on energy since when using the MODÌ System, the top surface of the slab remains much drier and not as cold.

HEALTHY: By using the MODÌ System in a geographical area where the cancerous Radon Gas exists, this dangerous gas can be vented to the outside, where it becomes harmless, insuring a safer environment in these houses.

LOAD BEARING: Using the MODÌ System, high load-bearing capacity is achieved.

SUSTAINABLE: The MODÌ System will not deteriorate, even if attacked by mould and bacteria, or by chemical agents, such as fertilizer.

PRACTICAL: By using the MODÌ System, space under the slab is created. It is ideal for running drainage pipes, ductwork and cables of various kinds resulting in easier inspection or repair if it should prove necessary. In particular, in the MODÌ H 50 and H 90 models, the staggered arrangement of the pillars allows for the elements to be shaped in any direction and allows for the passage of tubes without compromising the mechanical resistance, as though they were anchored with cement.

INNOVATIVE hooking system of the MODÌ H 50 and H 90 models allows for rapid assembly and guarantees the stability of the elements during the assembly and concrete casting phases.

EXCELLENT capacity of over 10,000 kg/ m² of MODÌ H 50 and H 90 and this allows for the creation of a flat surface directly on top of the MODÌ Ventilated Floor System that becomes the slab.